WAP Help and User Guide – System Settings v18

1. Analysis Labels

WAP Analysis labels will site within WAP and if linked to a document type, will not post through to Sage 200.  WAP analysis labels provide additional reporting fields and can be set per document type and if applicable, at either a parent or item level.  These analysis labels can be set to show on reports if required.  Text labels will allow the user to enter free text into the box and check box labels will allow the user to tick a check box.  N.B. some document types may only allow either text or check box labels.

The above example will appear on the Justification tab when entering a requisition.

If a requisition has an additional analysis field applied, an icon will appear in the Flags column on the summary grid tables and approval grid pages.

Another use of analysis labels is to for labels against a User profile; these can be used to keep a record of users’ leave date, whether a user is a first aider or an internal team the user belongs to.

These analysis codes will be visible under the Person Details tab on the user profile; only free text fields can be configured against the User.

If a user has an analysis code configured, these will show on the user grid which can then be exported if required.

NB: although 10 analysis codes can be configured against a User profile, only the first two will show on the user grid.

2. Countries & Cities

These are used by the Expenses module if Subsistence grades and rates are to be enabled.

Please refer to the Expenses Help and User Guide for further information.

https://www.sicon.co.uk/user-guide/wap-help-and-user-guide-expenses-module/

3. Credit Cards

This is where credit cards would be configured used by the Expenses module.

Please refer to the Expenses Help and User Guide for further information.

https://www.sicon.co.uk/user-guide/wap-help-and-user-guide-expenses-module/

4. Delivery Addresses

Delivery and invoice addresses need to be setup for users raising requisitions within WAP.  Configure default addresses before linking a Sage Company through to a user to ensure the default delivery and invoice address is associated.  Users will not be able to enter a requisition until a delivery and invoice address is selected.

Addresses which are ‘Not Sage Database Related’ will be available to use against all requisitions that are raised in the system, across all Sage Companies.  Addresses can be linked to a particular Sage Company if they should not be available across all Sage Companies.

Enter a new Address:  click to add a new address.

Import addresses from Sage warehouses:  addresses or locations can be imported for each Sage 200 Company.  N.B. free text delivery addresses are an option for users if configured within System Settings – Requisitions.

When adding a new address:

Sage Database:  choose to link the address either to a specific Sage Company or set that the address is not related to a company.

Warehouse:  if the address should only be linked to a particular warehouse, select from the drop down list.  Leave blank if the address is available regardless of the warehouse on the requisition.  N.B. a warehouse can only be picked if linked to a particular Sage Company.

Supplier Account:  if the address should only be linked to a particular supplier, select from the drop down list.  Leave blank if the address is available regardless of the supplier on the requisition.  N.B. a supplier can only be picked if linked to a particular Sage Company.

Name:  enter the name of this address; this would usually be the Company name.  This is a mandatory field.

Description:  enter a description of this address; this will be visible when entering a requisition so ensure the description will allow the user to pick the correct delivery address.  This is a mandatory field.

Postal Name:  enter the Postal Name; this will be configured to appear on the PO to the supplier so ensure the correct Company name is entered.

Contact Name:  if applicable, enter a contact name that should appear on the PO to the supplier.  This can be left blank if not required.

Address:  use the four free text boxes to enter the correct address.  At least one line must be entered per address.

Post Code:  enter the post code; this is a mandatory field.

Telephone No:  if applicable, enter a telephone number.  This can be configured to show on the PO to the supplier but is not a mandatory field.

Fax No:  if applicable, enter a fax number.  This can be configured to show on the PO to the supplier but is not a mandatory field.

Email Address:  if applicable, enter an email address.  This can be configured to show on the PO to the supplier but is not a mandatory field.

Web Address:  if applicable, enter a web address.  This can be configured to show on the PO to the supplier but is not a mandatory field.

Default Delivery Address:  tick if this should be the default delivery address either for the Sage Company selected or across all Companies.  There should be one default invoice address per Company or across all Companies.

Default Invoice Address:  tick if this should be the default invoice address either for the Sage Company selected or across all Companies.  There should be one default invoice address per Company or across all Companies.

5. Document Type Reminders

Reminders can be set to be sent to users linked to a particular document type.

To add a new reminder, choose configuration and click to Add.

Document Type:  select from the drop down list the correct document type; e.g. invoice, expense, timesheet etc.

Priority:  select the priority level that should show on the WAP homepage; either Low, Normal, High or Urgent.  High or Urgent priorities will be shown in red on the user’s homepage.

Interval:  select the correct interval, either weekly or monthly.  Depending on interval selected, either the day of the week or day of the month will then need to be selected.  N.B. if the interval is set as monthly, the day cannot be set as further than the 28^th day of the month.

Time of Day:  enter the time of day the email should be sent.

Description:  enter a description; this will be the email subject.

Use Out of Office Alternates:  if configured and a user has their Out of Office switched on in WAP, the document reminder will be sent to their out of office alternate user.

Text:  enter text as required; this will be the email text.

Send Now:  tick to send the notification email straight away.  If not ticked, the email reminder will be sent based on the interval and time configured.

Depending on document type selected, users will receive an email when specified and also see a reminder on their WAP homepage.

Examples of document reminders being set up:

• Weekly reminder to submit timesheets; one could be configured to be sent on Friday afternoon and also another configured on Monday morning.
• Weekly or monthly reminder to ensure expense claims are completed and submitted prior to the expense cut off.
• Weekly or monthly reminder if credit card statements have been imported.
• Monthly reminders to ensure invoices are approved prior to month end.

6. Email Threads

System email threads dictate how often notifications are emailed to users.  Please ensure that the Sicon WAP Service is restarted following any changes being made to the threads.  By default, there will be three threads created on initial WAP install; Daily, Hourly and URGENT.  The Daily thread is intended as a daily reminder to users containing all notifications while the Hourly thread is intended to show the user any new documents that are either awaiting approval or have been approved.  The Urgent thread is a system thread used when a user marks a document as urgent and cannot be deleted.  To make changes to a thread, click Edit or click to add a new email thread.

NB: ensure there are no threads configured that have no notification options ticked as this can prevent notification emails being sent out.

6.1. Interval Tab

The interval is determined by the ‘Interval’ and the ‘Next Email Send Time’.  In the example below the service will try and send emails 24 hours’ after 08:14, as that time falls within the Email Window Start Time (08:00) and the Email Window End Time (09:00), the email will be sent.  If the service was restarted, the Next Email Send Time could adjust and the interval may not fall within the ‘Send’ window.

If the interval was set at 30 minutes (rather than 24 hours), the service would try and send the email every 30 minutes after the Next Email Send Time.  If that time falls within the Email Window Start and End Time, emails will be sent.  N.B. if the setting for ‘Send Previously Sent Items’ is on (as configured under the Notifications tab), the user could potentially receive the email twice in a window of one hour.  If the service was restarted, the Next Email Send Time could adjust but as the interval is set to 30 minutes, this would mean it would fall into the send window.

If the interval is configured to be either minutes or seconds, the system will keep trying to send the email at that interval but will only send emails when that time overlaps with the Window Start and End time; if ‘Send Previously Sent Items’ is on, users will get emails until the notification is dismissed in WAP.

6.2. Days Tab

Configure the days the emails should be sent on.

6.3. Notifications Tab

Configure what notifications are sent on the thread; different notification options would be chosen on different email threads.

7. Event Log

The Event Log will show messages recorded by the WAP Service or WAP site; these can be useful to Superusers who are investigating if a document has failed to post.  More information can be found in the main Event Viewer.

8. Expense Item Types

If the Expense module has been enabled, this is where the expense types are setup initially.

Please refer to the Expenses Help and User Guide for further information.

https://www.sicon.co.uk/user-guide/wap-help-and-user-guide-expenses-module/

9. Expense Meetings

If the Expense module has been configured, this is where expense meetings can be created if required.

Please refer to the Expenses Help and User Guide for further information.

https://www.sicon.co.uk/user-guide/wap-help-and-user-guide-expenses-module/

10. Fuel Rates

If the Expense module has been configured, set up or edit fuel rates as required.

Please refer to the Expenses Help and User Guide for further information.

https://www.sicon.co.uk/user-guide/wap-help-and-user-guide-expenses-module/

11. Holiday Default Projects

If using both the WAP Holiday and Timesheet modules it is necessary to define a default holiday project within WAP.  Timesheets will be populated with users’ approved holiday requests, bank holidays and mandatory holidays, as configured, and these lines will need to be associated to a Job/Project and Job Header/Project Item.  Either set one default holiday job or project for all users or it is also possible to define specific jobs or projects at an individual user level.

If this default job or project is changed, timesheets will need to be reprocessed; under System Settings – Holidays.

12. IP Lockouts

If a login attempt is tried incorrectly more than five times the IP address will be blocked; the number of failed attempts can be configured within WAP System Settings.  Within this screen any IP addresses with a failed login attempt will be shown with the number of failed attempts.  IP addresses with more than five attempts will be blocked; it is possible here to either clear a single IP address or clear all lockouts.

NB: it is a User Type permission to be able to access this screen.

13. Re-post Requisitions

This function is provided as an advanced recovery option should the Sage 200 system need restoring.  Select the Sage Database and follow the instructions on the screen for the system to recreate any missing purchase orders in Sage 200.

NB: auto generate order return numbers must be switched off in Sage POP before running this function and re-enabled after the process is run.

14. Sage Connections

The Sage Connections screen provides the settings required to link WAP to a Sage company and will list the Sage Companies linked through to WAP.  There is no limit to the number of Sage 200 companies that can be linked.

Is Valid:  this will be ticked if the connection to Sage passes validation; if a Sage Connection is not valid the System cannot be used and the menu options on the left of the screen will be hidden.

Edit:  click to open up and view connection details, update PO layouts, logos and terms and conditions.

Delete:  use to remove a Sage company from WAP; it might be that a test company has been added in temporarily.

Make Base Currency:  if multiple companies have been linked to WAP with multiple currencies, mark one as the base currency.  This will be used to calculate approval values; other currencies will be converted to the base currency.

Suspend Posting:  if required, posting can be suspended temporarily for a particular company which will prevent any approved documents posting through to Sage.

14.1. Connection Details Tab

Once editing a company, the connection details will be visible.  Some information required here can be found in Sage System Administration but it is recommended to speak with your Sage Business Partner and/or IT contact for further assistance.  The Sage Company Description must match in WAP how the Company is named in Sage System Administration.

14.2. Company Details Tab

Information on this tab will be used when sending out approved purchase orders from WAP to suppliers.  Enter Company registration details as applicable; these can be found in Sage under System Settings.  Upload a company logo per company; ensure the format is .gif.  Under the Purchase Order sub tab enter the email subject and body text using the fields underneath.  Choose a purchase order report from the drop down list; it is possible to preview the report before selection.  If required, two different reports can be configured.

14.3. Terms & Conditions Tab

Terms and conditions can be entered which will be attached to a purchase order when emailing to suppliers.  Use the tabs at the bottom of the screen to preview how the text will appear when sent out.

14.4. Signature Page Tab

This page is only applicable if using Sales Order module; use the fields to enter a signature as required.

This page is only applicable if using Sales Order module and printing the Sales Order from within WAP; use the fields to enter a signature as required.  This will then add an additional page to the layout with the signature details included.

14.5. Settings Tab

Standard Tax Rate:  configure the standard tax rate; this is used by the Expense module when users enter an expense claim and depending on configuration, also by the Requisition module.

Non Tax Rate:  configure the non-tax rate; this is used by the Expense module when users enter an expense claim and depending on configuration, also by the Requisition module.

Per passenger category component for Project Accounting Expense Claims:  if using Project Accounting, select the component for passenger mileage claims.

Purchase Order Number Prefix:  if required, enter a prefix per company, e.g. SICON.  This will show before the PO number on the PO sent to the supplier but will not post through to Sage.

Next Purchase Order Number (Internal Orders):  used for when raising Internal Orders or if Sage Commercials are not configured; enter the next PO number to be used.

Warehouse to use for direct delivery:  to be used with the Sales Order module.

Default stock item warehouse:  if entering stock lines on a requisition and a default warehouse is to be used, select here from the drop down box.  If the stock item in Sage is linked to this warehouse, when entered on a requisition in WAP this warehouse will default.

WebAPI Enabled:  this will be configured if the install requires use of the WebAPI.

15. Subsistence Grades

If within the Expense module configuration, subsistence has been enabled, this is where subsistence grades are setup.

Please refer to the Expenses Help and User Guide for further information.

https://www.sicon.co.uk/user-guide/wap-help-and-user-guide-expenses-module/

16. Subsistence Incidentals

If within the Expense module configuration, subsistence has been enabled, this is where subsistence incidentals are configured.

Please refer to the Expenses Help and User Guide for further information.

https://www.sicon.co.uk/user-guide/wap-help-and-user-guide-expenses-module/

17. Subsistence Rates

If within the Expense module configuration, subsistence has been enabled, this is where the subsistence rates are configured.

Please refer to the Expenses Help and User Guide for further information.

https://www.sicon.co.uk/user-guide/wap-help-and-user-guide-expenses-module/

18. System Messages

Messages can be configured to appear in a yellow pop up to all users when they log into WAP; each message can have a unique text with a date and time to display until.  If the date and time is set within two hours of the present time, the message can prevent users from logging into WAP; this can be useful if needing to stop users logging into WAP while system configuration is taking place.

The message configured within system messages will appear on the users’ homepage following login and can be dismissed by clicking anywhere on the yellow banner.

19. System Settings – Approval Tab

The Approval tab is used to turn on and off various parameters that are used to create approval routes within the system.

19.1. Display Banner

View PDF Attachments Inline:  this must be enabled if using a document management system within the Invoice module; this setting will allow the attached invoice to be viewed during the approval process.

Use Acrobat Viewer for inline PDFs:  if Adobe is installed on client machines it will use this to open the attachment; if not enabled, the WAP viewer will be used.

Hide Budgets tab on approval pages:  this setting will hide the budget tab on all approval pages.

19.2. Functionality Banner

Various parameters can be turned on and off to create the required approval route settings per document within the WAP system.  These settings are configured per WAP install rather than per Company.  Once routes have been created or there are documents awaiting approval these settings cannot be changed without deleting routes.  Combinations of approval options are possible (for example requisitions could be approved by both requesting user and nominal account) but it is recommended to keep the routes as simples as possible to allow for easier administration.

All applicable document types are listed, e.g. Requisitions, Sales Orders, Invoices, Project Requisitions etc. and approval route functionality is set per document type.  Some document types may not have all approval options available; e.g. Holiday Requests can only be approved by requesting user.

Document Requires Approval:  by default this will be on but if documents do not require approval, this can be unticked.

Approve as Single Document:  if this is ticked it would mean that only one nominal account can be set per document; usually more than one nominal code would be needed on a document so this wouldn’t need to be switched on.

Approval Type:  set at either document item value or document value; document value will use the total value of the document for approval while document item value will total the lines with the same nominal code for approval.

Nominal Account:  approval to be based on nominal account (combination of account number, cost centre and department); if a new nominal account is added in Sage, corresponding approval routes would need to be created in WAP.

Supplier:  approval to be based on Purchase Ledger supplier account; if a new supplier is added in Sage, corresponding approval routes would need to be created in WAP.

Value Band:  value bands would be created to allow for documents to skip approvers; for example, if documents over a certain value should go straight to a Director for approval rather than going through line managers before reaching the Director.  Value bands are usually used in conjunction with another functionality option, e.g. nominal account or requesting user.

Requesting User:  approval to be based on the user who submitted the document; if new users are added in WAP, corresponding approval routes would need to be created.

Job:  approval to be based on the job or project selected; if new jobs or projects are created in Sage, corresponding approval routes in WAP would need to be created.

Job Header:  approval to be based on the job header or project item selected; if new job headers or project items are created in Sage, corresponding approval routes in WAP would need to be created.

Job Manager:  this can only be used in conjunction with Job Costing; approval would be based on the job manager linked to the job selected.  If new job managers are created in Sage, corresponding approval routes in WAP would need to be created.  If jobs are being created in Sage regularly, it can be advisable to have approval in WAP based on job manager as this would mean less maintenance in WAP; approval routes only need configuration if new job managers created rather than every time a new job is entered.

Requisitions:  if no costing module is configured, approval would usually either be based on nominal account or requesting user; if a costing module is configured, approval may be based on job or job manager.

Sales Orders:  usually approval would be based on requesting user.

Invoices:  if invoice approval is used in conjunction with the requisition module, invoice approval routes would usually mirror requisition approval routes.  Requesting user can only be selected if invoices are entered directly into WAP – i.e. when posting to Sage Commercials is disabled.

Project Requisitions:  usually approval would be based on requesting user.  Usually a default approval route would be configured as approval would only be required from one user or a user list (i.e. a Procurement Team).

Expenses:  usually approval would be based on requesting user.

Timesheets:  usually approval would either be based on requesting user or job/project.

Holidays:  these can only be approved based on requesting user.

Construction Application:  usually approval would either be based on supplier or job.

Customers:  these can only be based on requesting user.  Usually a default approval route would be configured as approval would only be required from one user or a user list (i.e. a Finance Team).

Supplier:  these can only be based on requesting user.  Usually a default approval route would be configured as approval would only be required from one user or a user list (i.e. a Purchase Ledger Team).

Stock Item:  these can only be based on requesting user.  Usually a default approval route would be configured as approval would only be required from one user or a user list (i.e. a Stores Team).

Expense Supplier:  these can only be based on requesting user.  Usually a default approval route would be configured as approval would only be required from one user or a user list (i.e. a Purchase Ledger Team).

Proposed Payments:  these can either be approved based on supplier or value.  Usually a default approval route would be configured as approval would only be required from one user or a user list (i.e. a CFO or MD).

If approval route functionality is to be changed, current non default approval routes would need to be deleted before the change is made and new routes created.  To deleted, click the ‘Approval Route Deletion Options’ banner and then select a Sage Database and a document type to delete routes for.  If required, all routes can be deleted but this should only be done at implementation stage as while there are no routes in the system, the menu options on the left hand side will be hidden.

NB: please use this functionality with caution; if approval routes are deleted they cannot be recovered; new routes need to be created.

The below settings can be changed if approval routes exist.

Approval routes for a document are restarted on changes made to a document by any user (not just the requestor):  as a system default, if a requester makes changes to a document, the document will restart the approval route.  If this setting is configured, if anyone other than the requester makes a change, the document will restart the approval route.

All Document Approval Routes are restarted when an approval route is changed:  if changes are made to an approval route, any document waiting approval will restart the approval route.  By default, this is not configured so documents currently awaiting approval will continue their current route.

Prompt for confirmation before approval when using ‘Approve All’ option:  if enabled, users will see an additional popup when using the ‘Approve All’ option.

Prompt for confirmation for individual item lines before completing approval (only when single document approval is disabled):  if enabled, users will see an additional popup when approving a line item.

When single document approval is enabled, compare the actual approval routes for the items rather than the approval options (e.g. the routes are the same instead of the nominal accounts being the same):  configure if single document approval is required but nominal codes may differ.

Approval history display type for report grids:  the options are combined, discrete, all or none; these will affect how approval progress is displayed with approval details.

19.3. Invoice Approval Banner

WAP has been developed with three settings regarding approving invoices that are linked to purchase orders.  Only one of the below settings can be chosen.  If these settings are changed, please restart the WAP service once saved to ensure the service uses new configuration.

Please refer to the Invoice Help and User Guide for further information.

https://www.sicon.co.uk/user-guide/wap-help-and-user-guide-invoices-module/

19.4. Mandatory Approval - Custom Fields

This feature allows up to three additional mandatory approval labels to be included in approval routes and can have customised labels.  If enabled, the label is displayed when entering a requisition for a user to tick and when creating an approval route, the custom fields will appear as additional mandatory options.

An example of this being used may be for strategic purchases or capex spends; a user may submit a requisition that is a capex spend so would require additional approval.  Either the user submitting the requisition or another user could tick the option on requisition entry screen for the custom mandatory flag to be picked up.

19.5. Self-Approval Banner

Each WAP user can be set up with a self-approval value per document type; this is configured on their user profile.  There are three options available for configuring self-approval when a requester is also in the approval route.  One of these must be selected; by default, the first option is checked.

NB: self-approval will override mandatory approval routes, except if the nominal or job is over budget.

Use the requestors self-approval value instead of the document approval value:  as a general rule, self-approval value is usually less than the user’s document approval value and this will accommodate the scenario where a user can approver other users’ documents at one value but they can only approve documents submitted by themselves at a lower value or at 0.00, forcing the document through the approval routes.

Use the approvers alternate user account where available, or remove the requester from the approval route for that document when there is no alternate user available:  the alternate user is set on the user’s WAP profile; if there is no user configured here, the document will go to the next step of the approval route.

Use the normal approval value that would be used if approving a document requested by another user:  the user’s document approval value or specific nominal approval value will be used rather than their self-approval value.  Use this option if nominal codes have different approval values.

20. System Settings – Budgets Tab

The Budgets tab is used for configuring settings as appropriate to check budgets when submitting or approving documents within WAP.  Budgets are always set in Sage, either against the nominal, the job or project.

20.1. Display Banner

Supress ‘Over Budget’ warnings:  this setting determines whether or not users are shown a warning when they enter a request that exceeds the budget for the nominal or job selected.

Budget Reporting Mode:  by default this is set to Detailed but can be changed to Simple if required.

20.2. Functionality Banner

Budget Calculation Mode:  by default this is set to ‘Standard’ but can be changed to ‘Actual plus approved invoiced lines’ if required.

Check Nominal Monthly Budgets:  tick to check nominal monthly budget, as configured in Sage.

Check Nominal YTD Budgets:  tick to check nominal year to date budget, as configured in Sage.

Check Nominal Group Budgets:  tick to check nominal group budgets, as configured in Sage.

Check Reporting Category Budgets:  tick to check reporting group category budgets, as configured in Sage.

Check Nominal Budgets during submission:  tick to check budgets when a document is submitted.  Some organisations may only require budgets to be checked during approval.

Check Project Budgets during submission:  tick to check budgets when a document is submitted.  Some organisations may only require budgets to be checked during approval.

Check Nominal Budgets during approval:  tick to check budgets when a document is approved.

Check Project Budgets during approval:  tick to check budgets when a document is approved.

Nominals Over Budget if Budget is Zero:  if enabled, nominal codes with no budgets set in Sage will be treated as over budget.

Enable ‘SiExtraBudget’ table:  a custom table that can provide additional years of nominal budget in addition to the standard Sage 200 ‘Next Year’ budget.

21. System Settings – Misc Tab

The Misc tab provides global system settings that affect information displayed to users, WAP licences, email configuration and security requirements.  The majority of these settings will be configured during initial implementation and should not require amendment.

21.1. Display Banner

System Culture:  this allows each system to have headings, tabs and labels amended for specific installs.  At present there is not yet a user facility to manage this but where specific organisation terminology is required, this can be provided at additional cost.

Sort order of supplier lists:  set whether supplier account listings are sorted by account number or account name.  By default, account number is selected.

Sort order of Nominal Account lists:  set whether nominal account listings are sorted by account number, account name, cost centre, department and account number.  By default, account number is selected.

Show Cost Centre and Department Names in Nominal Selection:  tick if users should be able to see cost centre and department names when selecting a nominal code.

Number of Items to show on each grid page:  defaulted to 15 but can be set to a higher value so the user does not need to click through so many pages to find information.

Decimal Format:  by default this is set to 0.00 but can be changed if required.

Show deleted lines by default:  if ticked, any deleted lines on a document will be shown.  By default, this is not ticked so a user must select that they want to view any deleted lines when viewing a document.

21.2. Functionality Banner

Sage configuration database string:  a full or partial connection string to the Sage Configuration database can be entered here to use the connection string from the web config file to fill in missing details; e.g. username and password.  This can be used to speed up adding new Sage companies into WAP.  This is not a mandatory field.

CRM Connection string:  a string will only need to be entered here if WAP is being connected with a CRM system.

Web API address:  this only needs to be configured if Sales Orders and Contracts are being used; contracts will be posted directly through to Sage prior to approval.

View Loaded Add-ons:  any loaded add-ons will be shown if applicable.

Close browser on Log Off:  if selected, when a user logs out of WAP the browser will close automatically.  Some companies require this as an additional security feature, particularly when single sign on is enabled.

Enable User Warehouses allocation:  this enables the functionality to allocate users to specific warehouses.

Use Non VAT rate only (uses configured non VAT rate per Sage database):  some Not-for-Profit or Charitable Organisations may require this setting to be checked if they cannot reclaim VAT or want to use a VAT inclusive or exclusive pricing module for requisition entry processing.

VAT Inclusive/Exclusive:  this setting is used in conjunction with the above setting; by default, this is set to be exclusive.

Enable Save Only Buttons on Document Entry:  if required, this setting can be enabled so users are only allowed to submit documents rather than save only.

Enable Sicon contract maintenance in WAP:  this only needs to be configured if Sales Orders and Contracts are being used.

Number of Security levels:  this relates to reporting abilities within the HR module.

Check for unsaved changes on leaving edit pages:  if enabled, a pop up will appear to users if they have made changes to a page and are moving away without clicking Save.  This is most noticeable when editing a user’s WAP profile.

Google Maps API key:  to use Google Maps functionality within the Expense module, enter an API key here.  For more information on Google API key requirements, please see the Expenses Help and User Guide.

Google Maps Autocomplete minimum length:  enter how many characters are required before Google will start searching for a postcode or place; e.g. 3 or 4 – IP3 or IP33.  It can be useful to enter a value here to reduce the number of searches Google undertakes when users are entering a postcode.

Allow dismissal of Awaiting Approval notifications:  by default users won’t be able to dismiss notifications that are awaiting an action but if this is required, enable this setting.

21.3. Licencing Banner

Each year the WAP system will require a new enable string to continue working.  When the new string has been issued, select Apply New Licence and then Browse and Upload the licence string.  The module expiry date is shown along with the modules that have been enabled and the maximum number of users.  For more information on WAP licencing, please see the Applying WAP Licences Help and User Guide.

21.4. Default Company Details Banner

Logon page logo:  this is the logo that will show on the homepage to the user when they log into WAP.  This must be a .gif format, should be max 100dpi, and no more than 7-10cm wide and 5-7cm high.  N.B. only one logo can appear on the login page.

Default print page logo (will be resized):  this is the default logo that will appear on PO layouts and should be a .gif format and max 100dpi.  Individual logos can be uploaded against each company in Sage Connections if different logos should appear for each company.

Default Address:  enter the main Head Office address here; this can be used by the Expenses module to allow for users to select an office address when entering mileage claims.

21.5. Email Banner

If any email settings are changed, please ensure the WAP service is restarted to pick up the changes.

Link to WAP system (for Email):  this is the hyperlink that will appear on the bottom of notification emails to take users directly into WAP.  If the URL is changed or the server is moved, this link will need to be updated.

System Email Address:  enter the email address that has been created for WAP to use; this is usually wap@companyname.co.uk.  This is a mandatory field if email integration is to be used.

All emails are sent from the System Email Address:  configure if all notification and supplier emails should be sent from the system email address.  By default, this is not ticked to allow POs to be emailed to suppliers from the user email account.  All notification emails will be sent from the system email address.

Service Error Notification Email Address:  enter an email address here if error notifications are required to be emailed to a particular user.  Any notification recorded in the Event Log will be sent to this email address.  It is advised an email address is entered here only when investigating if there is an issue with documents posting between WAP and Sage.

Bypass username and password validation (e.g. for Office 365):  only tick if the email account to be used is Office 365.

SMTP Username/Email/Password/Server/Port Number/Enable SSL:  an account must be entered for WAP to use to send emails out.  An IT contact who configured the email account will be able to provide the information required here.

Enable SMTP Email:  check this box to enable emails to be sent out from WAP.  It can be useful during initial implementation to uncheck this setting so when creating new users and testing the system emails are not sent out which could cause confusion.

Send a Test Email:  enter an email account and click send to ensure the email account settings have been configured correctly; any errors received should be reported back to the IT contact who initially configured the email account.  When testing it is advised to try sending an email to both an internal and external email address.

21.6. Notifications Banner

Notification Options:  set how the company requires notifications to be sent and whether reminders should be generated.  By default, the notification option is set for each module to be Document Item.  Document Type example notification – “A requisition is awaiting your approval”.  Document example notification – “Requisition for Supplier ‘ABC’ with ID Z for value £X needs your approval”.  Document Item example notification – “Item ‘X’ on Requisition Z with Delivery Date DD/MM/YYYY needs your approval”.

Use requisition line date to generate goods received reminder:  this is used in conjunction with the ‘Generate Reminders’ option against Document Type ‘Requisition’.  If this is ticked the requester will be sent a reminder each day past the delivery date if no goods have been received.

Automatically dismiss notifications after X days:  by default this is set to 14 days but can be amended if needed.

Generate Notifications for Out of Office users:  if this setting is on then notifications will be sent to any users marked as out of office and also their alternate users.  If this setting is not on, only the alternate users will get the notification, not the user who is marked as out of the office.

Include Company name in notifications:  this can be useful to switch on if users will receive notification emails across multiple companies to assist with identification of notifications.

21.7. Passwords / Security Banner

Require Complex User Account Passwords:  by default this is enabled with certain complexity requirements but these can be changed as needed to match company policy.

Remember me remembers password as well as username for automatic login:  if unchecked, this will only remember the user’s username, if the remember me option is ticked on the login page.

Hide ‘Remember Me’ option on Login page:  tick here if users should not be able to configure the WAP login screen to remember their username or password.

Allow users to change passwords on login:  if ticked this will allow users to change their password when they login.  If unchecked, the only way to change a user’s password is for an administrator to change on the user’s WAP profile.

Force Password change after number of days (0 for never):  if company policy is for users to change their password regularly, set the specified number of days here.

Allow users to request a ‘Forgotten password’ code:  tick to allow users the option on the login screen to enter their username and request a reset code be sent via email allowing them to access WAP and enter a new password.

Allow password reuse after how many passwords (0 for no checks):  if passwords should not be reused within a certain number of new passwords, enter a value here.

Number of failed logins before an IP Address is blocked:  the IP address will be blocked if a certain number of incorrect login attempts are made from the same IP address.  The IP address blocked will be that of the machine on the internal network, unless accessing WAP externally where the external IP address will be blocked.  Depending on which is blocked, it will either stop just the user trying to login or multiple users.  These IP blocks can be cleared using the ‘Delete all IP Address Lockouts’ button.

21.8. WAP Service Banner

Settings and functionality relating to the WAP service running are found here; please contact your Sage Business Partner if you have any queries relating to this service.

21.9. Cache / Memory Banner

Occasionally the cache (temporarily stored information from webpages) can prevent updated content being displayed or cause functionality problems; e.g. changes made in Sage not pulling through to WAP or a new logo not showing on the logon page.  These can be resolved by clearing the cache.

21.10. Logging Banner

Verbose Logging Enabled:  switch on to allow page access and memory to be recorded; by default, this is not enabled.  Verbose logging should only be enabled for a short period of time if diagnosing a particular WAP service issue.  If enabled, more detailed information will be recorded but this can result in large log files which can slow performance.

21.11. Sage 50 Payroll Banner

Add in ODBC details for Sage 50 Payroll to allow for importing of employees and HR data into WAP.

21.12. Mobile Access Banner

Enable Mobile Service:  this will enable the WAP system to allow access from mobile devices connected via the WAP app.

Mobile Service endpoint address:  required server URL which the WAP app will need to be connected to; e.g. “http://[server IP address]:[Port Number]/WAPService”.

Https certificate thumbprint to bind the port number to (required for https only):  required for users that require a secure connection.  A SSL certificate will need to be bound to the port and the unique identifier entered here.

Max file upload size from mobile device:  if a maximum upload limit for attachments (in MBs) is required, enter the maximum size here.

Enable Mobile Timesheets:  tick to allow for timesheet configuration with the WAP app.

Enable Mobile Sales Orders:  tick to allow for sales order configuration with the WAP app.

Enable Mobile Requisitions:  tick to allow for requisition configuration with the WAP app.

Enable Mobile Holiday Requests:  tick to allow for holiday request configuration with the WAP app.

Enable Mobile Expenses:  tick to allow for expense configuration with the WAP app.

Enable Mobile Invoices:  tick to allow for invoice configuration with the WAP app.

22. System Settings – Costing Tab

The Costing tab is used to link WAP through to a particular costing module or to stop posting into Sage Commercials.

Enable posting to Sage Commercials (SOP & POP):  only untick if the Sage install does not use Commercials so approved requisitions are not posted to Sage and invoices are entered directly into WAP.  N.B. if this is disabled, a costing module cannot be selected.

None:  check this if no costing module is to be enabled; this option is the default.

Job Costing:  select if linking WAP to Sicon Job Costing.  If this is selected, additional Job Costing settings will appear.

JC – Job Costing Percentage Complete Filter:  any jobs with a percentage complete figure greater than the figure entered here will not be pulled through to WAP.

JC – The number of transactions to display per page on summary:  this will determine on the Job Costing enquiry screen in WAP, how many transactions to display on the summary page.

JC – The number of transactions to display per page on main tabs when displayed in CRM:  if using CRM integration, this will determine on the Job Costing enquiry screen, how many transactions to display on the main tabs.

JC – The number of transactions to display per page on main tabs when displayed in WAP:  this will determine on the Job Costing enquiry screen in WAP, how many transactions to display on the main tabs.

JC – Job Costing Rates are allocated in Sage 200:  set against each employee in Job Costing which cost rates should be available in WAP to choose from when entering timesheets.

JC – Show the Cost to Complete tab in Job Costing list:  tick to show the cost to complete tab; if this shouldn’t be shown in WAP, untick.

JC – Show the Project Summary tab in Job Costing list:  tick to show the project summary tab; if this shouldn’t be shown in WAP, untick.

JC – Default to simple view for Job Costing list:  tick to default to the simple view for Job Costing list; if the advanced view should show, untick.

Project Accounting:  select if linking WAP to Sage Project Accounting.

PA – Show Description in Project Item Drop Down:  by default this is ticked; untick if the user should not see the project description, only the project code.

WAP Projects:  select if linking to WAP Projects.

WP – Auto Generate WAP Project Numbers:  tick if project numbers should be auto generated or untick if project numbers should be entered manually.

Allow list selection of Project Items (if this is disabled users must use the tree):  by default, this is selected and will allow users to select a job and job header from the drop down list rather than using the tree structure.

Show tree selection box:  select this to allow the user to select a job header or project item using the tree structure; this can make it easier for users if projects have many layers of project items.  N.B. some screens (Rapid Timesheet Entry screen) do not allow for tree selection, users can only pick a project item from the drop down list.

Force Project Selection:  set to either Yes, No or Prompt to specify whether users should enter a job or project against each item line within WAP.  If Job Costing is configured, this should be set as Yes.  Yes, will force across all modules all lines to be entered against a Job and Job Header; Prompt will allow the user to not select a job but they will see a pop up asking if they should select a Job, and No will allow the line to be saved with no Job selected.

23. System Settings - Document Manager Tab

The Document Management tab is used to link WAP through to a document management system with some common settings regarding image location and size.

23.1. Common Settings Banner

File path for WAP attachments:  an existing local folder where WAP can save documents to.  Please ensure the file path does not end with \

Continually check for new documents for Invoices/Credits with no attachments:  this can be ticked so any invoice or credit in Sage with a U query will be checked for new images entered into Sage to ensure these are pulled through to WAP.

Resize images uploaded into WAP:  this will resize any images uploaded to prevent large images taking a long time to load.  N.B. these settings relate only to images, not other file types.

Prefer compression over quality for uploaded images:  if ticked, this will try to make the file as small as possible while still being readable.

Convert uploaded images to greyscale:  this will turn all images uploaded to greyscale, again to improve loading times.

Maximum width for resized uploaded images:  values entered here are defaults but can be changed as required per install.

Maximum height for resized uploaded images:  values entered here are defaults but can be changed as required per install.

Maximum file upload size (MB):  values entered here are defaults but can be changed as required per install.

23.2. New Sicon DMS Banner

Tick to link WAP to DMS.  N.B. only one document management system can be configured per install.

23.3. Legacy Sicon DMS Banner

Tick to link WAP to Legacy DMS and if required, add a port number to the DMS document path.  N.B. only one document management system can be configured per install.

23.4. INVU Series 6 Banner

Tick to link WAP to INVU and enter the Server details as required.  N.B. only one document management system can be configured per install.

23.5. Draycir Spindle Document Capture Banner

Tick to link WAP to Spindle and enter Hostnames and Port Numbers as required.  To integrate Spindle with WAP, a Third Party Product Key will need to be obtained from Spindle and enter on the Spindle licence key settings as shown below.  The user running the WAP Service will also require permission to view documents to enable documents added in Sage to be viewed in WAP.  N.B. only one document management system can be configured per install.

24. System Settings – Enhancement Pack Tab

If Sicon Enhancement Pack is enabled within Sage, various settings can be replicated within WAP.

24.1. Functionality Banner

Show Supplier Popup Notes:  if Popup Notes have been entered against a supplier, these will be shown in WAP when a user is entering a requisition in WAP and selects the supplier.

Show Customer Popup Notes:  if Popup Notes have been entered against a customer, these will be shown in WAP when a user is entering a sales order in WAP and selects the customer.

Show POP Stock Item Popup Notes:  if Popup Notes have been entered against a stock item, these will be shown in WAP when a user is entering a requisition in WAP and selects the stock item.

Show SOP Stock Item Popup Notes:  if Popup Notes have been entered against a stock item, these will be shown in WAP when a user is entering a sales order in WAP and selects the stock item.

25. System Settings - Expenses Tab

If the Expenses module is configured, this tab will be available to configure expense, mileage and subsistence system settings.

25.1. Functionality Banner

Post Expenses to Sage:  untick if all expense claims should not post through to Sage.

Nominal Account Source for Expense Items:  the expense item nominal can be set to default from either the user’s default nominal code (set on their WAP profile), to the Expense Item Type nominal or to the Project Item nominal code.  Users can only change the nominal if they have the User Type permission to do so.

Override expense type nominal with Project Item Nominal:  for example if the nominal code is being driven from the user’s expense item type but the Cost Centre or Department should be overridden from the job selected, tick this box.  Once ticked, options to override the account number, cost centre or department will be available.  N.B. this option is only applicable if using Job Costing.

Nominal Selection Filter Source:  if the user has permission to change the nominal code on expense entry, whether to allow the user to choose from all nominal accounts they have access to, or just nominal codes that have been assigned to that expense type.

Expense Claim Posting Method:  expenses can either be posted as a claim through to Sage Project Accounting or an invoice through to the user’s Purchase Ledger account.

Maximum Gratuity Percentage:  set as required to restrict the gratuity amount a user can claim.  A user will not be able to enter an expense claim with a gratuity amount higher than the percentage entered here.

Enable ‘Extra’ details tab for expenses:  this will enable the Extra tab on an expense claim where additional information (such as gratuity amounts, 1^st class travel etc.) can be recorded if required.

Display Allocated (Paid) Status:  this will show to users when a payment has been allocated to their expense claim in Sage; only new expenses put onto the system after this setting is configured will show payment status.

Automatically Load Existing Expenses on Page Load:  choose whether to automatically load expense claims when the Existing Expense page is loaded, or whether the user needs to click to show their expenses.  This can prevent speed issues when loading if there are large numbers of expense claims.  N.B. by default completed expenses will not show; the Include Completed box will need to be ticked.

Enable Linking Requisitions to Expenses:  configure here if users will need to link a PO approved through the Requisition module to an expense claim.  N.B. the requisition must be raised by the user against their Purchase Ledger account; this will keep the PO within WAP (it won’t post through to Sage) and can then be linked to an expense claim.

Allow Negative Amounts:  this feature may be required to cope with refunds through Company credit card expense claims or against a user’s personal expense claim; e.g. prepayment of a hotel room booking which was not used.

Lock Expense currency to User account currency:  configure this setting if the user is to be restricted to only enter expense claims in the currency of their Purchase Ledger supplier account.  If disabled, currencies set up in Sage will appear in a dropdown selection.

Set Expense Header Date based on latest line on the expense claim:  if disabled, the expense header will default to the date the expense was initially entered.

Consolidate Expense Line nominal when posting to Sage:  if enabled, lines with the same nominal code on a user’s expense claim will be consolidated to one line when posting to Sage.

Restrict Expense Line Date Entry/Current date +- number of days for date restriction:  this will restrict the time period when an expense claim can be submitted and can be configured as per the organisation’s policy.  By default, this date is set to 31 days.

Warn user when future expense line date is entered:  if the user selects a future date on an expense, a pop up warning will appear to the user.

Allowed Expense Payment Method:  select whether users are able to enter either Personal, Company expense claims, or both.

Default Expense Payment Method:  choose the default expense payment method that will be selected when a user goes to enter an expense claim.

Enable Credit Card Statement Imports (Disables user company expense claims):  switch on if using an import to bring in company credit card statements; this will stop users from being able to manually enter company credit card expense claims.

Obtain Expense Project Item from Expense Type:  if using a Costing Module, choose if the costing header should be selected from the Expense Type, rather than the user choosing manually.

Enter Expense Type into Line Description on selection:  this will populate the expense type name into the Description field; this can speed up expense line entry for users.

Disable printing Expense Vouchers (Send Email only):  if this is enabled, the user will not be able to print the expense voucher but will be able to email directly from WAP.

Prompt user on potential duplicate Expense Line entry:  if this is checked and the user enters an expense claim with the same expense item type, date and value, they will need to enter a reason for why this is not a duplicate claim.  Potential duplicate expense claims are highlighted as such to the approver.

Enable meeting selection on expense entry:  tick here if meetings are to be configured in the system against expense claims.

Meeting selection is mandatory on expense and mileage entry:  if all expense claims (i.e. subsistence claims, incidental claims, mileage and general expense entry) should be allocated to a meeting, ensure this setting is ticked.

Maximum number of characters in meeting codes:  if applicable, enter a maximum value for the meeting code.

Transaction Analysis Code Mandatory (if enabled in Sage):  if using transaction codes in Sage, these can be populated against an expense claim in WAP.  If it is mandatory for these codes to be entered in WAP, configure here.

Force Minimum Attachments Criteria:  if setting against an expense type the number of attachments that must be uploaded, configure here to either force attachments to be uploaded, prompt a user if no attachments but allow for users to not upload a receipt, or allow for users to save without an attachment.

25.2. Mileage Banner

Enable Mileage Line Entry:  untick here if the organisation does not permit mileage claims to be entered.

Mileage Unit (can be overridden per country):  select either Miles or Kilometres.  If required, this can be overridden per country (System Setup – Countries & Cities).

Mileage Year Change (can be overridden per country):  this is the date that the mileage values will be reset; i.e. the calculation of business miles recorded on a private vehicle.  If required, this can be overridden per country (System Setup – Countries & Cities).

Nominal Account Source for Mileage Items:  the mileage item nominal can be set to default to either the user’s default nominal code (set on their WAP profile), to the Expense Item Type, the Category Component or the Project Item nominal.  Users can only change the nominal code if they have the User Type permission to do so.

Obtain Mileage Project Item from Expense Type:  if Job Costing is being used, the default costing header can be set per Sage Company to automatically populate the job header when a user is submitting a mileage claim, rather than the user choosing manually.  The nominal can be driven by the job header if required.

Default ‘Receipt Attached’ Value:  for mileage claims it is possible to default the receipt attached value; if the receipt value is Yes, VAT will be calculated on the fuel component on the rate selected; if the receipt value is No, no VAT will be calculated.

Warn user when future mileage line date is entered:  if a user selects a future date on a mileage line, a pop up warning will appear to the user.

Record Personal Mileage in Company Vehicles:  this enables the user to enter personal mileage as well as business mileage against a company car.  This may be required for some company car schemes.

Track Private Vehicles:  by default there will be a system Private vehicle that all users will have access to; only select this option is users’ private cars must be listed individually.  The majority of organisations will not require tracking of private vehicles.

Enable claiming for passengers:  if the organisation allows for users to claim an extra passenger rate, configure this setting.

Prevent users editing calculated business mileage (use mileage amendment):  if the user is not allowed to manually enter mileage figures or edit the figure provided by Google, the user must use an amendment field and provide an explanation for why they are making an amendment.

Prompt user on potential duplicate Mileage Line entry:  if this is checked and the user enters a mileage claim with the same date and mileage figures, they will need to enter a reason for why this is not a duplicate claim.  Potential duplicate mileage claims are highlighted as such to the approver.

Mileage Line Declaration Required:  by default this setting is on with the below text.  When a user goes to enter a mileage claim, they must accept the below.  If they do not accept, they will not be able to submit a mileage claim.  This text can be edited to match the organisation’s required declaration text or can be turned off if required.

25.3. Subsistence Banner

Enable Subsistence Claims:  check if the organisation allows for subsistence claims; once checked, additional options will become visible.

Subsistence Overnight/Conference/Detention Rate Days:  the number of days incrementally that a rate applies; defaults are entered at install but can be edited in accordance with the organisation’s policy.

Disable ‘Receipt Attached’ drop down for Subsistence Claims:  if receipts are not required for subsistence claims, this setting should be configured.

Separate Meals and Accommodation in Subsistence Entry:  if required, the subsistence overnight and meal claims can be broken down to post to different nominal codes.  If configured, the Domestic and Foreign subsistence expense types will require nominal codes to be entered per Subsistence (Meals) and Subsistence (Accommodation).

26. System Settings – Invoices Tab

If the Invoices module is configured, this tab will be available to configure invoice system settings.

26.1. Functionality Banner

Allow duplicate Transaction References:  if invoices require editing once they are in the WAP system, e.g. nominal code to be changed, this setting will need to be enabled.

Pick up Proposed / Suggested Payments for approval in WAP:  if suggested payments should be approved in WAP, enable this setting.  If not ticked, suggested payments would not require approval in WAP before being paid in Sage.

Require Invoices to be recorded by matching to a Goods Received note:  applicable to invoices entered directly into WAP only.

Require Expected Invoice Values to Match Actual values when recording invoices:  applicable to invoices entered directly into WAP only.

Automatically populate the second reference with the WAP Invoice ID:  for invoices entered directly into WAP; automatically populate the second reference with the WAP document ID.

Approve invoices ‘Select all’ check box selects all items on the current page (off selects all items all pages):  if users have the User Type permission to select and approve multiple invoices at a time and if this setting is enabled, only invoices on the current page will be approved, preventing users from accidentally approving all items on all pages without checking the invoices on subsequent pages.

Display Allocated (Paid) Status:  whether to show the payment allocation status of an invoice; once a payment has been allocated to an invoice this will update in WAP to show either Unpaid, Allocated or Paid.

Automatically Load Existing Invoices on Page Load:  if ticked, all current invoices will be loaded automatically.  If not ticked, use the Search filters and Quick Links to display invoices required.  N.B. by default Completed invoices will not show unless the option to include completed is ticked.

Validate a Sage accounting period exists for the Invoice Transaction Date:  when ticked, the system will validate whether the accounting period exists when saving or submitting an invoice.  This setting is applicable only to invoices entered directly into WAP.

Number of seconds old Invoices / Credits have to be before picked up by the WAP service for approval:  by default this is set to zero so invoices will be picked up by the WAP service as soon as they are saved in Sage.  If other third party software must be run in Sage once an invoice has been saved prior to WAP picking the invoice up, enter a value here, e.g. 60 seconds.

Transaction Analysis Code Mandatory (if enabled in Sage):  applicable to invoices entered directly into WAP only; if transaction analysis codes have been configured in Sage, these must be completed in WAP.

Restrict Invoice Line Date Entry:  applicable to invoices entered directly into WAP only; this can restrict the time period an invoice can be entered.

When Placing Invoices on Hold:  notifications can be sent to previous/current/future approvers to advise the invoice has been placed on hold.  If this setting is changed, please ensure the WAP service is restarted as this relates to email notifications.

27. System Settings – Holidays Tab

If the Holidays module is configured, this tab will be available to configure holiday, bank and mandatory holiday settings.

27.1. Functionality Banner - General Tab

Default holiday period start date:  set as per the organisation’s holiday period start date; the default will be configured as January 1^st.  Each user can have a different holiday start date if required, this is set on their user profile (User Setup – Users – Holidays); i.e. if their holiday year starts on a different date.

Default holiday entitlement for users (hours):  enter the standard number of holiday entitlement in hours, again, this can be overridden per user on their user profile.  The default entitlement will be the number of working hours in a day multiplied by the default holiday days; e.g. 7.5 x 28 to give 210 as the default.

Do not allow submission of holiday requests if there is a conflict with already booked holiday of a specified user:  if enabled, conflicting users will not be able to submit holiday for the same date(s).  If not configured, conflicting users can submit holiday requests for the same date(s) and the requesting user and approver will be notified of the conflict at the point of submitting the request and when approving the request.

Allow entry of historic holiday requests:  this allows pre-dated holiday requests, within the same holiday entitlement year – a user cannot claim holiday in a date if they do not have entitlement that covers that year.  This may be required if the Holiday module is implemented part way through the holiday year and already taken holiday needs to be entered onto the system.

Do not allow submission of holiday requests if the user has not accrued enough holiday:  accrued entitlement will be calculated based either on the holiday year start date, or the employee’s start date (entered on their user profile), if this date is after the holiday year start date.  If this setting is ticked, the user cannot submit a holiday request if it is greater than their accrued holiday.

Allow booking single hours:  the system will by default allow users to book holiday in days or half day amount; enabling this setting will allow single hours on a day to be booked.

Who to send meeting requests to on final approval:  this setting will automatically email meeting requests to add approved holiday to relevant users’ Outlook calendars.  N.B. the meeting invite will be sent to the email address linked to the user on their WAP profile, will be sent from the system email address (as configured in System Settings – Email) and will contain details of the holiday request in the body of the email.  On final approval of a holiday request, a meeting invite can be sent to different users depending on configuration:

• None – no meeting invites are sent.
• Requestor – a meeting invite is sent to the user who submitted the holiday request.
• Default Business Unit – if the user who submitted the holiday request has a default business unit allocated, the meeting invite is sent to all users who are part of that business unit.
• All Business Units – the meeting invite will be sent to all users of all business units the user who submitted the holiday request belongs to.
• All Users – the meeting invite will be sent to all active WAP users.

Automatically set users out of office when holiday starts:  if enabled, when a user enters a holiday request they can select an alternate user to cover their holiday period.  When the holiday starts, the requesting user’s WAP out of office is automatically switched on and any documents requiring approval will also be sent to the chosen alternate user.

Automatically set users out of office when holiday ends:  if enabled, when a user enters a holiday request they can select an alternate user to cover their holiday period.  When the holiday has ended, the requesting user’s WAP out of office is automatically switched off.

27.2. Functionality Banner – Non-Working Days Tab

WAP is installed with the default country’s bank holidays as standard and are referred to as Non-Working days which will not be deducted from a user’s annual entitlement.  At install, the default country is England but this can be changed if required (System Setup – Countries and Cities).  Additional non-working days can be added as required; either for the whole year by selecting the year and clicking ‘Add bank holidays to selected country for year (GB only)’ or by selecting the country, entering a description, date and clicking ‘Add Non-Working Day’.

Other Options:  Reprocess Timesheets will remove current non-working days already posted to timesheets and re-post per dates on the screen and will need to be run if new days are added.

27.3. Functionality Banner – Mandatory Holidays Tab

This function enforces mandatory holiday which will be taken from the user’s entitlement.  These mandatory holidays can be added as per the organisation’s requirements; i.e. Christmas Shutdown.  If additional mandatory dates are added, the Reprocess Timesheets option will need to be run again to update users’ timesheets.

28. System Settings – Requisitions Tab

If the Requisitions module is configured, this tab will be available to configure requisition entry and goods receive system settings.

28.1. General Tab – Display Banner

Show ‘Additional Reference’ field:  if configured, an additional free text field will show on the requisition header which can be populated as required; this column will also show on the Existing Requisitions page.

‘Additional Reference’ field label:  the additional reference field can be renamed as required.

Hide Nominal Budget column on Budget tab:  if nominal budgets are not to be shown, this setting will hide the nominal column on the budget tab.

Hide Project Budget column on Budget tab:  if project budgets are not to be shown, this setting will hide the nominal column on the budget tab.

Hide Supplier Currency information:  if configured, this setting will not show the supplier currency information on the requisition header page.

Hide Tax rate column on ‘Values’ tab:  if configured, this setting will not show the tax rate column on the values tab.

Hide ‘Requisition Number’ from all screens:  this setting will hide requisition IDs from the Existing Requisitions and Approval pages.

Hide ‘Discount Percent’ from free text line entry:  this setting will hide the option for users to enter a discount percentage on a free text line.

Hide Tax Code from free text line entry:  this option will hide the tax code selection box on the free text entry screen.  If hidden, the standard tax rate as configured against the Supplier in Sage will be used.

Show Buying Unit on free text line entry:  this option will show the buying unit free text field on a free text line for users to provide detail as required; i.e. to say it was a Pack of 6 or Box of 12 being ordered.

Show Delivery Date on free text line entry:  this setting can be used to hide the delivery date on a free text line if there should only be one delivery date on a requisition.

Hide ‘Discount Percent’ from Stock Line Entry:  this setting will hide the discount percent field on a stock line entry.

Hide ‘Tax Code’ from stock line entry:  if required, this setting can be used to hide the tax code when entering a stock line.

Hide ‘Nominal Account’ from Stock Line Entry:  this setting can hide the nominal account selection box when adding a stock line entry.  If hidden, the default nominal code on the stock item will be used.

Hide Confirmation Method from Free Text Line Entry:  if the default confirmation method should be used when entering a free text line, use this setting to hide the confirmation entry box.

Hide Confirmation Method from Stock Line Entry:  if the default confirmation method should be used when entering a stock item line, use this setting to hide the confirmation entry box.

Hide ‘Nominal Account’ from Stock Line Entry:  if the default nominal code set on a stock item should be used when entering a stock item line, use this setting to hide the nominal selection box.

Hide ‘Delivery Date’ on stock item entry:  this setting can be used to hide the delivery date on a stock item line if there should only be one delivery date on a requisition.

Remove supplier stock filter when entering stock item:  this setting will remove the option to filter items by other suppliers when entering a stock line.  If hidden, all stock items for the relevant supplier and group will be shown.

Supplier Filters – Remove ‘All Suppliers’ option:  this setting will stop all suppliers being available to select from when raising a requisition; only suppliers marked as approved in Sage can be chosen from.

https://www.sicon.co.uk/user-guide/wap-help-and-user-guide-requisitions-module/#12

Supplier Filters – Remove ‘Approved Suppliers’ option:  this setting will remove the option to see approved suppliers when choosing from the supplier list; all suppliers in Sage will be visible (unless a supplier is on hold).

Project Requisition – Hide ‘Add Stock Item line’ button:  this option will remove the ability for a user to enter a stock item line on a project requisition; only free text lines can be added.

28.2. General Tab – Functionality Banner

Sicon MRP Integration Enabled:  this will only be switched on if orders generated via MRP should be pulled through to WAP for approval.

Allow out of hours’ orders:  if enabled, out of hours’ requisitions can be raised that will post straight through to Sage and create a PO number, but will need to be approved retrospectively.

Enable ‘Free Text’ line entry:  untick this setting if users should not be able to enter a free text line.

Enable ‘Stock Item’ line entry:  untick this setting if users should not be able to enter a stock item line.

Enable ‘Comment’ line entry:  untick this setting if users should not be able to add comment lines on a requisition.

Enable ‘Additional Charge’ line entry:  untick this setting if users should not be able to add additional charge lines on a requisition; it may be that postage or carriage costs should be added as either a free text or stock item line.

Auto populate Order Date with current date:  by default this setting is on but can be unticked if the user should select the required order date.

Auto populate Delivery Date with current date:  untick this setting if users should be forced to select the correct delivery date rather than the date being automatically populated with the order date.

Automatically post to Sage when raising a requisition:  this setting should only be used where a PO can be created and a PO number raised before the requisition is approved.  This setting is not commonly used; a requisition should be fully approved before a PO is created.

Allow requisitions to be submitted without a Supplier:  this setting will allow users to enter lines on a requisition without selecting a supplier; a supplier must be selected prior to the requisition posting through to Sage.

Auto populate supplier from stock item preferred supplier (if no supplier set):  this setting would be used in conjunction with the setting above so when a stock item is selected, the preferred supplier will populate the supplier field on the requisition header page.

Use supplier price breaks (Enhancement pack required):  if Sicon Enhancement pack is configured in Sage and a stock item has been configured to use supplier price breaks, these can be read by WAP.

Allow requisitions to be saved without lines added:  by default, if a requisition is added with no lines, the system will prompt users to allow for the requisition to be saved but if this shouldn’t be possible, this setting can be configured to not allow this.

Value to use for Document Date when posting Requisitions:  this can either be set to use the requisition document date or the current date; i.e. the date when the requisition is approved and posts through to Sage.

Allow Past dates on Requisition Entry:  by default the system won’t allow requisitions to be raised in the past but if this is required, this box can be ticked.

Maximum Number of lines on a requisition:  by default this is configured to allow no more than 200 lines on a requisition but this can be amended accordingly to match company requirements.

Disable submitting of over budget requisitions:  if required, users can be prevented from saving a requisition if the line has a nominal or job that is over budget.  If configured, it can cause users to select another nominal code or job that is within budget but may not be the correct one.

Select Stock Item Default Nominal Account when a Stock Item has been selected:  if configured, the nominal code will be populated from the stock item selected, rather than the user having to select manually.

Allow amendment of Discount Percent on Requisition Entry:  this will allow users to make changes to any discount percent against an item.

Stock Item Pricing Mode:  select from the drop down list the appropriate stock pricing mode; by default, this is configured as set on supplier.

Use Warehouse Nominal Account Override:  if configured, the nominal cost centre or department can be overridden based on the warehouse selected on the stock item line.

Enable Document Number Prefix:  this setting can allow a prefix to the PO number; the prefix is pulled from Sage Connections against the specific company.

Enable Free Text Delivery Addresses:  this option will allow users to free type a delivery address on a requisition; this is usually not recommended as the preferred option is to allow users to select an address from a drop down box.

Enable Supplier Delivery Addresses:  this option allows users to select the supplier’s address as configured in Sage.

Enable Project Delivery Addresses:  if a costing module is configured, addresses from projects can be selected.

Enable Customer Delivery Addresses:  if applicable, the customer’s address from the costing module project can be selected.

Disable Nominal Selection when a project is selected:  if enabled, the nominal code will pull through from the Job Header/Project Item on the requisition line, instead of the user having to select the nominal code.

Retain Line Information on Save:  with this ticked information such as the nominal code or job will be held when the line is saved.  This can speed up the requisition entry process for users who input requisitions with lots of lines where the nominal code or job is not changed.

On line delivery date, use the order header requested delivery date rather than the stock lead time date:  by default, if a stock item has a lead time set against it in Sage, the line delivery date will be changed to reflect this.  If this setting is configured, the line delivery date will remain as the delivery date set on the order header page.

No default tax rate on new orders:  if enabled, users will need to select the appropriate tax rate for that line on the requisition.  If disabled, the default tax rate will be pulled through from how the company has been configured in Sage PL.

Use ‘Standard’ tax rate only (Charge Items):  configure so only the standard tax rate can be used on charge lines.

Use Supplier Default Tax Rate (Charge Items):  configure so the tax rate set against the supplier in Sage PL is used; if not configured, the standard tax rate set against the company in Sage Connections will be used.

Automatically Load Existing Orders on Page Load:  by default, this will be on and if a user clicks on Existing Requisitions, orders they have raised will be loaded automatically.  If this is causing speed issued, this can be turned off to force users to search for specific orders.

Allow confidential requisitions:  if enabled, a check box will appear on the requisition header page for the user to flag the requisition as confidential.  This means the requisition will only be seen by the requester, required approver and any users with the View All Requisition User Type permission.

Enable ‘Call off’ Requisitions:  if enabled, a check box will appear on the requisition header page for the user to flag the requisition as a call off order.

‘Call off’ requisitions label:  the call off field can be renamed as required.

Requisitions are ‘Call off’ requisitions by default:  if all, or the majority of orders are call off orders, this can be ticked.  Users are still able to untick the box is a non-call off order is being raised.

Allocate Stock Items by WAP Delivery Address:  configure if stock items should be allocated based on the delivery address entered when the requisition is raised.

28.3. General Tab – Goods Received Banner

Enable Receive All button on Goods Received:  if enabled, a Receive All option on the goods received process will automatically populate the quantity to be received from the outstanding quantity values.

Allow over receipt of goods:  if enabled, users will be allowed to over receipt goods.  By default, this is not configured.

Goods Received Reference Source:  the reference recorded in Sage can either be the Goods Received Supplier Document Number (Reference), the WAP Username, or both.

Enable editing Free Text line description when partially received/invoiced:  if allowed, free text line descriptions can be edited when the line has been partly goods received or invoiced.

28.4. General Tab – Order Templates banner

Auto Populate Delivery Date:  if ticked, the delivery date will auto populate to the current date.  If unticked, the user must select a specific delivery date.

Override Warehouses based on User:  the warehouse selected on templates can be defaulted to that set per user (User Setup – Warehouses).

Enable All Supplier Stock Items Template:  if enabled, this template will be available to users when raising a stock requisition.

Enable User Order Template Allocation:  if enabled, multiple templates can be crated and users allocated to them as required (User Setup – Requisition Templates).

28.5. General Tab – Justification Banner

Sage Database:  select whether the justification bands are for one specific database or valid across all Sage Companies.

Enter Justification bands as required; in the example above, documents under £500 do not require a quote to be attached, documents between £500 and £5,000 must have one quote attached and documents over £5,000 must have two quotes attached.  When creating the justification bands there cannot be any overlapping; e.g. £0 – £500 band and also £200 – £400.

28.6. Printing Tab

These settings are legacy settings relating to versions prior to v18; any changes made here will not affect the PO Layouts configured in Sage Connections.

28.7. Analysis Codes Tab

WAP Requisitions can pull through up to 20 Sage POP Analysis Codes as required; these are configured in Sage (Accounting System Manager and POP Maintenance).  Selecting Default will populate the requisition with the corresponding code from Sage POP.  If the WAP settings are configured to ‘Populate from Order’, the analysis codes will appear at the bottom of the requisitions Delivery and Invoicing tab, but if the setting is changed to ‘Validate on Line’, the codes can be selected at the time of entering each line and therefore can be different per line.

The codes can be marked as Mandatory and if they need to appear on the Existing Requisitions or Approve Requisitions grids in WAP, check the ‘Include in Grids’ option.  If the code labeling needs to be changed to make it more user friendly, tick the custom label box and enter the new narrative as required.

It is also possible to populate the Sage POP Analysis Codes with particular WAP fields.  Check in Sage the number of the next free analysis code in Sage POP and then within WAP select from the drop down list available.  In the example below, the POP Analysis Code 4 will be populated with the Requisitioner Name.

29. System Settings – Sales Orders Tab

If the Sales Order module is configured, this tab will be available to configure sales order entry and pricing system settings.

30. System Settings – Timesheets Tab

If the Timesheets module is configured, this tab will be available to configure timesheet entry and approval system settings.

30.1. General Tab – Display Banner

Show code on project dropdowns:  untick if the job/project code should not be visible to the user when selecting a job on a timesheet line.

Show ‘Timesheet Entry’ button on dashboard:  this option is not currently configured.

Hide available and active projects on dashboard:  this option will hide jobs when a user clocks into the T&A screen.  This will be configured for sites who are using T&A terminals for recording time in/out only rather than recording time against a job.

Timesheet project time entry format:  hours recorded against a job/project on a timesheet line can either be logged as decimal, start/end time or hours/minutes.

Timesheet Hide Cost Code column:  this will show or hide the cost code column; this will display cost rates to the user, e.g. Normal/Overtime.

Timesheet Hide Cost Rate Column:  this will show or hide the cost rate column; this will display cost figures to the user.

Timesheet Hide Charge Code Column:  this will show or hide the charge code column; this will display charge rates to the user, e.g. Normal/Overtime.

Timesheet Hide Charge Rate Column:  this will show or hide the charge rate column; this will display charge rates to the user.

Timesheet Hide Sage Pay Code Column:  this will show or hide the pay code column; this will display pay codes to the user, e.g. Normal/Overtime.

Timesheet Hide Sage Pay Rate Column:  this will show or hide the pay rate column; this will display pay rates to the user.

Timesheet Hide Notes:  configure if the notes tab should be hidden on timesheet entry.

Timesheet Hide Sicon Pay Rates tab:  configure if the Sicon pay rates tab should be hidden on timesheet entry.

Timesheet Hide Time Off in Lieu tab:  configure if the TOIL tab should be hidden on timesheet entry.

Timesheet Hide Concurrent Jobs Column:  if unticked, a column will show on the timesheet entry page that will show the number of concurrent jobs booked onto at the same time.  This will be for users recording activity on jobs through the T&A terminals.

Timesheet Approval – Hide Edit button:  this will remove the option to allow approvers to edit a timesheet while waiting their approval.

Timesheet Week Number – Hide Week Number:  if the week numbers should not show to a user when they are inputting their timesheet, tick this option.

Timesheet Entry – Show week end date:  if the week end date should show to a user when they are inputting their timesheets, tick this option.  By default, the user will always be able to see the week start date.

Timesheet make notes field compulsory:  if this is ticked, the user must enter notes when entering a timesheet line.

Show total hours requiring approval on Timesheet approval page:  this will add an extra column on the Approval page showing the total hours requiring approval.  By default, this setting is not configured.

Enable Login Activity Tab on timesheet entry:  enable this tab if users are expected to record their log in and out time.

Number of Login Activity Records requires to submit a timesheet:  if required, set how many login lines must be recorded before a user can submit their timesheet.

Login and Project Activity totals must match when submitting a timesheet:  configure this if it is mandatory for the user’s login times to match their time recorded against a job/project.

The allowed variance between login total and project total (%) when matching totals:  if a variance is allowed between total login time and job/project time, enter this percentage figure here.

30.2. General Tab – Functionality – General Banner

Week Start Day:  this denotes which day the timesheet should start on.  N.B. this setting cannot be changed if work patterns have been created.

Limit Timesheet notes to 60 characters:  configure this if the notes field should be limited.

Update Works orders as soon as time added to timesheet (on save):  the hours will post through to the appropriate Works Order as soon as the user saves the timesheet.

Update Job Costing transaction as soon as timesheet submitted:  if enabled, the labour transactions will appear as committed costs when the timesheet is submitted for approval and update to an actual cost when fully approved.

Split Timesheet Project Lines by Work Pattern:  this setting should be enabled if ‘Automatic selection of cost rate based on standard timesheet work pattern’ functionality is required.

Allow timesheets to be copied:  if enabled, this will allow users to copy an approved timesheet from one week to another.

Don’t allow users to submit timesheets if required contracted hours haven’t been reached:  a user’s contracted hours are set on their WAP user profile; if this setting is configured, they won’t be able to submit their timesheet until these hours have been reached.

Check contracted hours based on the total of timesheets across all companies:  if users are submitting timesheets across multiple Sage companies, check this setting if the contacted hours check is to be done across multiple companies.

Don’t allow users to submit timesheets if daily maximum hours exceeded:  daily maximum hours can be entered on their WAP user profile; if this setting is configured, a user cannot submit their timesheet if their daily hours have gone over their maximum allowance.

Automatically approve timesheets within variance allowance:  an allowed variance can be setup to allow timesheets to be processed if the time logged on the ‘Login Activity’ tab compared to the time logged against a job/project is within a certain percentage.  If the setting ‘Login and Project activity totals must match when submitting a timesheet’ is checked, the variance allowance is used to check if a timesheet can be manually submitted.  If ‘Auto Submit Timesheets’ is being used, this setting is overridden and timesheet lines that are not within the allowed variance can be set to go to different approval routes to allow a moderator or team leader to adjust the times against the project.

Show delegate user as final approver when a timesheet is approved as a delegate:  if a delegate is used to approve a timesheet, the final approver will change to show the delegate user instead of the standard approver.

Enable report approval lists using User Types:  this setting is no longer applicable.

Limit time entry to 24 hours per day:  if this is configured, users won’t be able to enter more than 24 hours on a day.

Create Timesheet lines for times outside of work patterns:  additional lines will be created for hours logged that are not picked up by a work pattern.

Prevent Timesheet being edited if employee contract has expired (Job Costing):  a contract expiry date can be recorded on the Employee details in Job Costing so that within WAP the timesheet cannot be edited if their contract has expired.

Number of days to start warning that an employee’s contract is due to expire (Job Costing):  if a contract expiry date has been recorded on the Employee details in Job Costing, a warning banner can appear when a user creates or submits a timesheet in WAP a certain number of days prior to their contract expiry date.

Maximum number of weeks in advance to allow users to enter timesheets for:  a value can be set here if users should not be allowed to enter their timesheets far in advance.

Prevent multiple allowance lines of the same cost code to be added:  this can be enabled if users are only allowed to add one allowance line at a certain allowance cost code per timesheet; i.e. if users can only claim one overnight allowance per day.

Number of hours to limit allowance line entries to:  the number of allowance hours entered on a timesheet can be limited as required.

Automatically load existing timesheets on page load:  for speed reasons this can be disabled; i.e. if the existing timesheets page is taking a long time to load up all timesheets.

Use Holiday work pattern when adding holiday to timesheets:  by default, the holiday hours approved through WAP holiday module will post to users’ timesheets based on their timesheet work pattern, but if required, this setting can be enabled to pick up the hours from the holiday work pattern.  For example, if a user’s standard timesheet work pattern is for Monday 5 hours, Tuesday 4 hours and Wednesday 5 hours, and the user books a Monday – Wednesday holiday, their holiday work pattern can be set as 4.25 hours on each day to average the hours accordingly.

30.3. General Tab - Functionality – Automation Banner

Day of the week to process automatic timesheet functions:  the day required for timesheets to be automatically submitted.

Time of day to process automatic timesheet functions:  the time of the day for timesheets to be automatically submitted.

Auto submit timesheets:  once enabled, configure the day and time to auto submit timesheets.

Automatically notify users that haven’t submitted a timesheet:  tick to notify users that haven’t submitted a timesheet.

Number of weeks previous to current date to check for unsubmitted timesheets:  enter the number of previous weeks to remind users about unsubmitted timesheets.

Earliest date to check for unsubmitted timesheets:  enter the earliest date to check for unsubmitted timesheets.

30.4. General Tab – Functionality – Time & Attendance Banner

When click on “I’m here” go back to the login screen if no available projects or jobs:  if required, this can be configured for users to be taken back to the login screen if no jobs are available to select once logged in.

Auto return to Time & Attendance Login screen:  if a user does not select a job within set time period after login, the screen will return to the login screen.

Interval in seconds for auto logoff:  set as required the auto logoff duration.

Maximum number of booked on jobs at one time:  set if required the number of jobs that a user can book onto at one time.

Enable Barcode mode in Time & Attendance:  if required, users can log onto a job by scanning a barcode.

Enable Works Order Integration for timesheets:  set if required to link WAP to Works Orders within Sage.

Enable Operations Integration for timesheets:  enable to allow user to view all operations when selecting a works order.

Exclude ‘Machine’ operations from the Time & Attendance dashboard:  if enabled, only labour operations will be visible to the user.

Allow more than the outstanding quantity to be booked to an operation:  by default, users are not allowed to book a quantity greater than the quantity outstanding, configure this if this functionality is required.

Enable booking Works Order finished item quantity on final operations:  by default a user can’t enter the Works Order finished item quantity; if this setting is enabled, an additional pop up is shown to the user when booking off a final operation on a Works Order to record the quantity.  Works Orders will not be booked in via Time & Attendance.

Show all cost items when booking to works orders in Time & Attendance:  if not enabled, users can be limited as to what cost items they can see.

Auto Logoff users still logged in after the end of their work pattern:  if required, users can be automatically logged off if still logged in once their work pattern has finished.

Lenience for auto logoff after work pattern:  used in conjunction with the above setting; set in hours the time to automatically log off a user still logged in once their work pattern has finished.

Filter out completed works orders on terminal screens:  if required, only works orders that have not been completed will be shown.

Force users to sign in before viewing jobs:  users must log in before being able to view available jobs.

Book off all active jobs by booking onto a new job:  the user will automatically be signed off a job when logging onto a new job.

Time & Attendance – number of characters to truncate job title/description to:  use this setting if there are jobs with long titles or descriptions.

Prevent Timesheet lines being submitted as soon as they are created:  if not configured, the timesheet will need to be manually submitted.

Show reasons for leaving on the Time & Attendance dashboard:  configure to show to the user the configured reasons for leaving.

Time & Attendance – hide job activity:  configure to hide the job activity from the time and attendance screen.

Time & Attendance – hide payroll posting date:  configure to hide the payroll posting date from the time and attendance screen.

Number of previous jobs to show on the Time & Attendance dashboard:  configure the number of previously logged on jobs the user can see on their dashboard once logged in.

30.5. General Tab – Functionality – Costing Banner

These settings are only visible if using Job Costing integration.

Use ‘TimesheetHours’ work pattern to split timesheet lines by cost rate:  this setting should be enabled if ‘Automatic selection of cost rate based on a timesheet hours work pattern’ functionality is required.

For Job Costing, divide time of jobs if booked at the same time:  total time logged against multiple jobs will be split out and posted to the jobs.  This is only applicable if booking time through the T&A terminals and users are allowed to book onto multiple jobs at a time.

Use Sicon Sage Timesheets:  if configured, timesheets will be saved to the Sage database in SQL rather than the WAP database.

Use job Costing Work Patterns for Timesheet entry:  if configured, work patterns should be created in Job Costing that are used by employees.

Timesheets entered by a Job Costing team leader create transactions for the whole team:  if a user who is marked as a Team Leader submits a timesheet in WAP, this can automatically create timesheets for each member of their team.

30.6. Reasons for Leaving Tab

Create reasons for leaving that will be visible to users when logging out at the end of their shift; this is only required if recording time through the T&A terminals.

30.7. Sign on Locations Tab

Create locations to be used for the T&A terminals.  N.B. the name must contain no spaces (i.e. “FrontOffice”) but the description can (i.e. “Front Office”).  Click New to save the location prior to saving the main System Settings.

31. System Settings – Auditing Tab

This tab is used for switching on WAP Auditing and also reporting on changes made.

31.1. Functionality Banner

Audit Log Enabled:  switch on to record changes being made within the WAP system.  N.B. not all fields within WAP are currently audited.

If auditing is enabled, by default all audited changes will be visible within this list but the date filter can be used to restrict to only show changes within a certain time period.  Type in filters into the column headers to view only specific lines.

32. Vehicles

This is where vehicles would be configured used by the Expenses module.

Please refer to the Expenses Help and User Guide for further information.

https://www.sicon.co.uk/user-guide/wap-help-and-user-guide-expenses-module/

33. WAP Project Items and Types

WAP Project Items and Types are set up in conjunction with WAP Projects to create a range of cost header to assign transactions to.

33.1. Project Item Types

When setting up WAP Project Item Types, enter a code, title and specify which document types to make the project item available on; e.g. labour should only appear on timesheets.  Project Item Types must be set up prior to Project Items being created.

33.2. Project Items

When creating WAP Project Items, select the Type, enter a code and title.  Codes must be unique across each project item.

34. WAP Projects

WAP Projects provides a simple costing module which sits within WAP and does not post to Sage.  It can only be used if no other costing module is in use and needs to be activated within System Settings before Projects and Project Items can be created.  Depending on configuration, project codes can either be generated automatically or users will need to enter a unique code when creating the project.  Enter a title, select a status and add the project.  Once a project has completed, it is possible to edit the project and change the status to Closed.  Users will only be able to select open projects when entering a transaction within WAP.

35. Warehouse Nominal Accounts

This function allows the ability to override the cost centre and/or department of a nominal code on the requisition line based on the warehouse selected.  N.B. ensure the setting ‘Use Warehouse Nominal Account Override’ is enabled in System Settings.

36. Work Patterns and Rates

This is where work patterns and rates would be configured used by the Timesheets and Holiday modules.

Please refer to the Timesheets Help and User Guide for further information.

https://www.sicon.co.uk/user-guide/wap-timesheets-module/

37. Year End

This function provides a routine to reset the users’ mileage at the end of each year and will also create bank holidays for the next year.  This functionality has no impact on Sage Year End routines.

38. WAP Email

Basic email functionality exists within WAP to allow for users to email either other WAP users or external contacts.  It is a user type permission to be able to access the Email icon at the top of the screen so can be configured as per organisation requirements.

To:  either select from the drop down list a WAP user or enter an email address in the box below.

From:  choose whether to email from the email address configured against the logged in WAP user, or from, the System Email address – as configured in System Settings.

Subject:  enter the email subject.

Body:  enter the email body.

Send Email:  click to send the email.

39. My WAP Settings

All users will have access to their own WAP Settings by clicking on the icon at the top of the screen with the ID card and single cog.

Theme:  different screen and menu colours are possible within WAP; the default will always be configured at install and may be reverted back to default during a WAP upgrade.

Out of Office:  if a user is an approver they should switch on their out of office to direct approvals to another user.  Once the out of office has been set as on, the user will see a list of other users to select from; it is only possible to select one alternate.  When the user logs into WAP when they return, a pop up will show asking whether to switch off out of office.

Cookies:  use this option to reset cookies if required; i.e. to clear any customisations made on reports.

40. Enquiries

This are various menu options under the Enquires option on the left – these are user type permissions so can be assigned accordingly.

40.1. Budget Enquiry

Users will be able to view nominal budget information for any nominal codes they have been given permission to.  Some users may be given permission to view all nominal accounts in the budget enquiry; this is a permission allocated on their WAP user profile and is usually only given to Finance members or Administrators.  This enquiry will show a breakdown of Annual and YTD budgets set against a nominal code and data can be exported to Excel for further analysis if required.

Budget information is pulled through from Sage; monthly and annual budgets are set against the nominal account and YTD will show the combined total of the monthly budgets up to the current period.

Actual:  invoiced costs that are in open accounting periods.

Deferred:  invoiced costs that are in closed accounting periods.

Historical:  historical costs.

Outstanding POP Lines:  purchase orders that have not yet been invoiced.

Unapproved Requests:  requisitions in WAP that have not been approved.

Unapproved Invoices/Expenses:  expenses or invoices entered in WAP that have not yet been approved.

40.2. Expense Nominal Accounts

This report will show the total expense claims against individual nominal codes for expense claims entered in WAP.  It is possible to show only mileage or expense claims, or all.  Data can be exported to Excel or PDF as required.

40.3. Custom Reports

If any bespoke reports have been created specifically for the install, these will be found here.  Standard WAP reports should provide all information required and are configured per module.

40.4. User Costing Headers

If a costing module is configured, this enquiry will list out each costing header that a user has been granted access to.  This report can be exported to Excel or customised on the WAP screen if required.

40.5. User Costing Item Types

If a costing module is configured, this enquiry will list out by user each costing item type they have access to.

NB: if a user has access to all Costing Item Types, they will not appear on the report.

40.6. User Costing Items

If a costing module is configured, this enquiry will list out by user which costing items they have access to and in which module, and whether a specific item or approval value is being used rather than the user’s default.  N.B. if a user has access to all Costing Items, they will not appear on the report.

41. Sage Admin

Sage Admin functionality allows users to request new suppliers, customers and stock items in WAP which once approved, will post through to Sage and be available to use in WAP.

41.1. Enabling Sage Admin

User Type permissions need to be enabled to allow users to either request suppliers, expense supplier, customers or stock items, view all requests and approve requests.  These permissions can be found under the Sage Admin tab in the User Type settings.

Once a user has relevant permissions, a new menu option will appear on the left titled ‘Sage Admin’ with various menu options underneath, depending on permissions enabled.

41.2. Sage Admin Approval Routes

All Sage Admin approval routes are based on requesting user and built using the standard approval route wizard functionality.

41.3. New Customer Requests

Click on New Customer and enter details as applicable.  All the below details are mandatory except the telephone and website fields.  A check is done on the account reference to ensure it does not exist in Sage already.

Under the Contacts tab, complete as applicable.  The first name, last name and email fields are mandatory.

Under the Trading tab, complete as applicable.  The Country code is the only mandatory field; analysis codes will be pulled through as configured in Sage.

The Approval History tab will be populated once the request is submitted and approved.  Once all fields have been completed, click Save & Submit.  The request will go down the pre-configured approval route and show to the approver as awaiting approval.  The request can be approved or rejected and clicking view request details will open the customer request to allow for amendments to the fields before being approved.  Once fully approved, the customer will move to the Completed tab, appear in Sage and be available for selection in WAP.

41.4. New Supplier Requests

Click on New Supplier and enter details as applicable.  All the below fields are mandatory except for the telephone and website fields.  A check is done on the account reference to ensure it does not exist in Sage already.

Under the Contacts tab, complete as applicable.  The first name, last name and email fields are mandatory.

Under the Trading tab, complete as applicable.  The Country code, default tax code and duration to keep transactions for are mandatory fields.  Analysis codes will be pulled through as configured in Sage.

Under the Bank tab, complete if known.

Under the Payment tab, complete as applicable.  The Payment Group is the only mandatory field.

Under the Attachments tab, enter a document providing additional justification for the new supplier, it might be that headed paper is required; either attach using the drop files or browse option.  If DMS is enabled, once the supplier is approved this documentation will post through to Sage.

The Approval History tab will be populated once the request is submitted and approved.  Once all fields have been completed, click Save & Submit.  The request will go down the pre-configured approval route and show to the approver as awaiting approval.  The request can be approved or rejected and clicking view request details will open the supplier request to allow for amendments to the fields before being approved.  Once fully approved, the supplier will move to the Completed tab, appear in Sage and be available for selection in WAP.  If bank details have not been added by the user entering the supplier request, these will need to be added directly into Sage.

41.5. New Stock Item Requests

Click on New Stock Item and enter stock details as applicable.  All the below fields are mandatory.

Under the Supplier tab, complete as applicable; none of these fields are mandatory.

The Approval History tab will be populated once the request is submitted and approved.  Once all fields have been completed, click Save & Submit.  The request will go down the pre-configured approval route and show to the approver as awaiting approval.  The request can be approved or rejected and clicking view request details will open the stock item request to allow for amendments to the fields before being approved.  Once fully approved, the stock item will move to the Completed tab, appear in Sage and be available for selection in WAP.

41.6. New Expense Supplier Requests

New expense supplier requests are made through a user profile, usually when a new user is added onto the WAP system and if there is no PL supplier account already set in Sage for the user.

On a user’s WAP profile, under the Company Access tab – Expenses sub tab, click New Expense Supplier to be taken to the new supplier pages; some fields will already be populated with data from the user’s WAP profile but can be overridden if required.

Complete all mandatory fields as per the standard new supplier request screen and submit for approval.  Once submitted, this request will follow the pre-configured approval route for new expense supplier requests.  Once approved, the supplier account will be linked to the user’s WAP profile.

42. Job Costing Screens within WAP

If Job Costing has been configured as the costing module, it is possible to link the job list through to WAP to allow users to complete analysis on their jobs, edit certain fields or create new jobs.

42.1. Job Costing Type Permissions

If Job Costing has been configured as the costing module, there are User Type permissions to allow for Job Costing screens to be viewed in WAP with limited fields being able to be edited in WAP.

Can access Job Costing screens:  whether the Job Costing screen menu options are visible on the menu options on the left of the screen.

Can view all jobs in Job Costing screens:  if this is ticked, the users will be able to see all jobs, if unticked, users can only view jobs where they have been set as the job manager or, have had jobs allocated to them within their user profile.

Can edit jobs in Job Costing screens:  if this is ticked, the users will be able to amend a job and edit the percentage complete figure and the actual completion date.  Once saved, these will then update the job within Sage.

Can add/edit memos in Job Costing screens:  if this is ticked, users will be able to add notes or memos onto the job in WAP which once saved, will post through to the job within Sage.

Can create jobs in Job Costing screens:  the ability for a user to create a job within WAP that will save through to the Job list within Sage.

Can edit job analysis codes in Job Costing screens:  if this is ticked, users will be able to edit analysis codes as configured from Job Costing settings within Sage.  Once an update has been saved it will post through to the job within Sage.

Can view Job Custom Field values in Job Costing screens:  the ability for a user to view additional custom analysis tabs, as configured from Job Costing settings within Sage.

Can edit Job Custom Field values in Job Costing screens:  this setting is used in conjunction with the setting above; the ability for a user to edit additional custom analysis tabs, as configured from Job Costing settings within Sage.  Once updates have been saved, these will post through to the job within Sage.

42.2. Job Costing List

If a user has permission to access the Job Costing screen, the Job List will display jobs as configured within Sage; screens and views may change depending on User Type permissions.

Sage Database:  the Sage Company the user has access to by default will be selected and if the user has access to multiple companies, they can choose another company using the drop down list.  If the user only has access to one company, the list is greyed out.

Columns:  this will show any extra columns that can be configured to show on the job view, or columns can be removed if not required.  As per other WAP report screens, columns can be dragged around or filtered by using the top search options.

Export XLS:  the job list can be exported to Excel; this will export the data as shown on the screen.

Job Enquiry:  once a job has been highlighted, click to see the Job Enquiry screen.

Amend Job:  once a job has been highlighted, click to view additional job information or if permissions have been granted, make changes to analysis fields or completion figures.

New Job:  if permission has been given, click to create a new job.

Show Advanced List:  click to view budget, variance, committed and revised data and if applicable, application, valuation or retention information.  N.B. accessing the Advanced List can cause loading delays as there may be large amounts of data so by default, this option is not ticked.

42.3. Job Enquiry

The job enquiry screen displays all transactions for a selected job grouped together as expenditure, income, stock and labour transactions.  Data can be exported to Excel for additional filtering and analysis; click the Export banner at the top of the screen and select the tab to export.  If a PO on the Expenditure tab was raised through WAP it is possible to click on the order number to view the order within WAP.  Clicking on Edit job will take the user through to the Amend job screen.

42.4. Amend Job

This screen is used to show additional details of the job and if user type permissions allow, for various fields to be amended.  It is possible to go directly into the job enquiry screen from the amend job screen by clicking the button at the bottom of the screen.

42.5. Add New Job

If a user has permission to do so, they will be able to create a new job from within WAP.  This functionality would usually be reserved for Administrators only.  Depending on Job Costing settings, users will either need to enter a job number or this will be populated automatically once the job has been saved and posted through to Sage.

43. Enable Module

Each year your WAP system will require a new enable string to continue working.  When the new one has been issued, select System Settings – Misc – Licencing.

NB: for your information, the module expiry date is shown along with the modules that have been enabled and the maximum number of users.

44. Sicon WAP Help and User Guide Requisitions Module V17

WAP Help and User Guide – System Settings v17

45. New Features & Important Information

45.1. Sicon v21.1

45.2. Sicon v21

45.3. Sicon v20.1

45.4. Sicon v20

45.5. Sicon v19.2

45.6. Sicon v19.1

45.7. Sicon v19

45.8. Sicon v18